Easyfix Magnetglaze Extreme – high grip detachable insulation

Although the appearance of Magnetglaze Extreme is reasonable, many customers choose to use our Finishing Trim, which at 32mm wide can be used to mask both the tape and the cut edge of the sheet if needed. For illustrative pictures, see at the bottom of this page. The Trim comes in either White or Brown, can be neatly cut and mitred using strong scissors and gives the finished job that professional edge. Packs comprise 1 or 2 x self adhesive 5m coils plus 1 or 2 Surface Preparation Wipes. Alternatively, you can use Magnetglaze Pro Extreme, where the magnets are attached to a smart plastic capping, again in White or Brown. Should you want to joint the pane, in order to make several more manageable pieces or easier ventilation, you can use Magnetglaze Sash Heavy Duty, that provides a rigid horizontal joint but maintains full insulation. This add-on system is suitable only with 4mm sheet.

The products on this page can use glazing sheet of up to 6mm thick, which we are unable to provide. The One Stop Plastic Shop do offer this - they are an independent company with whom we have traded for many years. Click through for 6mm cut to size Polycarbonate or 6mm cut to size Acrylic if you want to buy direct from them. Otherwise, 4mm sheet tends to provide a good balance between cost, weight and rigidity, and is the most popular choice of our many customers for the Magnetglaze Extreme system.

If there is insufficient space on all sides of your window surround to fit Magnetglaze Extreme, Window Conversion Angles can be fixed to the insides of the frames giving a clean wide surface. They are heavy duty Angles with a 25mm face and 3mm thickness, in white or brown to match the kits. More information is in the PDF below, with product details on the right side of this page.

There can be window handles, beading, trim or other obstacles that make it necessary to fit your Magnetglaze Extreme panel further away from the window surround. It is useful to know that the combined thickness of the steel/magnetic tapes with their adhesives is approx 3.5mm, giving you some clearance over the obstacles, but you can also fit our self-adhesive Packing Strips in order to increase this distance. These are flat plastic adhesive strips which are easy to cut and fit. For the Magnetglaze Extreme product, the 25 x 3mm or 25 x 5mm Strips are likely to be most suitable - stick them in the correct position for your panel then add the steel tape to them, ensuring they are butted up close to maintain the thermal seal for your secondary pane.

To add opaque film to your existing outer windows, as a smart alternative to blinds or net curtains, you can via our Privacy Frost Window Film page. This cost-effective new product is attractive and easy to fit.