Easyfix Clipglaze Flexible Edging – Prepack Kits

Easyfix Clipglaze flexible secondary glazing is easy to use and has been providing heat and noise insulation for over 60 years. The flexible capping is installed on the glazing sheet edges, and the panel is fixed to the window surround by nylon turnbutton clips and screws. The clips allow easy removal of the glazed panel for access or cleaning, and enable re-use year after year. They are 9.5mm wide at the base, and the appropriate height for the sheet thickness plus the edging for the size described.

Clipglaze is suitable for edging and insulating curves, because of its flexibility. This makes it possible to secondary glaze arched and round windows where there is space for the clips to be attached.

Installation is simple, with normal household tools. 45 degree mitres are made using the unique Clipglaze Mitre Gauge, enabling neat corners. Full fitting instructions are included in each pack, or can be followed from the video or PDF on this page.

Click for more

The Clipglaze system can be purchased as Clipglaze Separate Components or in kits that contain a suitable quantity of fixings. Each 15m kit has 72 clips and screws, the 5m "starter kits" have 24 clips and screws, and both sizes of kit contain a mitre gauge. The brown kits contain brown clips, while the clear and white kits both use milky white "natural" coloured clips.

Note that the edging strip can appear kinked before use, because of the coiling within the kits. This will not affect the strip installing properly onto the sheet edge, but if placed in a warm place for a short while before use (e.g. airing cupboard) it will be a little more pliable when handled.

easyfix flexible edging strip easyfix flexible edging fixings

The products on this page can use glazing sheet of up to 6mm thick, which we are unable to provide. The One Stop Plastic Shop do offer this - they are an independent company with whom we have traded for many years. Click through for 6mm cut to size Polycarbonate or 6mm cut to size Acrylic if you want to buy direct from them.

If you want to add cost-effective opaque film to your outer windows, as a smart alternative to net curtains or blinds, you can via our Privacy Frost Window Film page. This new product is neat and easy to fit.

Display Prices Ex VAT Inc VAT

Polycarbonate Glazing Sheet

£33.00 – £59.00 per metre 2

Min height & width 100mm. Max size 2440mm x 1220mm
(height = largest dimension, width = smallest dimension)
N.B. Please check your dimensions carefully before ordering cut sheet as once this has been ordered and cut, it cannot be refunded.

Size *